...Wagner
Speedway ...
tons of clay, 3/8 of a mile, 42° banked turns, 1 really good time!
...Wagner
Speedway ...
tons of clay, 3/8 of a mile, 42° banked turns, 1 really good time!
Classified Ads
If you have any racing items you would like to sell, we will list them here at no charge. We ask that you send complete information of the item you are wanting to sell and pictures (if you have any) to slim4s@hotmail.com. Wagner Speedway Inc. is providing this classified ads page as a free service to the racers. We ask that your items be represented in a truthful and ethical manner.
06 TDR/ 77 Camaro Late Model Street
Stock ( Pro Stock ) For Sale
Has weight jacks in the front and
mono leaf springs with a 9" floater in the rear.
Sold as a
roller with a 16 gal. fuel cell, racing seat, guages, tach, extra
suspension parts,
headers and other misc. parts. Was ran a couple
races in Wagner in 2009, has been run
mostly at I-90 Speedway in
2011 and Husets a few times.Weighs over 3000 lbs so could
be
ran with a engine larger than 360 CID @ Wagner Speedway. $1500 .
If interested conact Fred Konechne @ 605-680-2945
B mod
Front Bumpers.
monte/regal/cutlass metric front $50
chevelle
front $50
metric impala $50
Latemodel Front
Bumpers.
Feggers $125
Mastersbilt/Warrior/ GRT tube
type $125
Bullitt $125
Jesse
605 366 0624
_ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ - _ -
99 updated in 04 by GRT. #1229
Bill Frye Front Suspension
BRT P/S Rack
Outlaw calipers all the way around
PSR Radiator
Brinn Trany. with fast shaft
longAcre/Accutech gauges
Intergra Gas Shocks 4 wet shocks and 2 dry shocks
Franklin Rear end with GRT ball bearing birdcages
GRT J-Bar
Afco 5th shock
Purple 6th coil
SCP Stock Car Products Dry Sump Pumps
MSD Ignition box
Teltack
Wissota spec heads.
Edelbrock 4 barrel intake
MSD Distributor
BLP 4 barrel Carburetor with extra jets
*Plus more extra parts.
$5300 or best offer
the car worked great. straight was on the jig last year and not raced this year.
Call or text Ryan (605)-929-9399

06
Galloper mod- was a 4 link still has all
brackets changed to 3 link this year when wissota changed rules.
Turnkey $6000 with new motor (2 shows)/$5500 with Homerun
motor (30 nights) or roller $3000 or trade for late model.
Wont sell anything else until car sells.
On
the car right now
QA1
shocks with 4 nights, Springs have 4 nights, Afco
slider on
left rear, QA1 coil over on right rear, Winters
rear-end
Has
6:00 gears ultra light full spool 31 spline in it (would put whatever
gear works best in), 22 gal fuel cell, Kirkey light
weight
seat
Belts new last
year, Basset wheels(6 total), Triple pass
radiator, Willys carb, schoenfeld headers (3 shows)
Moroso
distributor, KRC aluminum PS pump, Gauges
(fuel,oil,water,tach), Oil cooler
Bushore w/ aftermarket bell
housing everything lightened (7 shows) 11” torque converter
Motor in it right now has 2
shows was built by Doug Myers
Extra
stuff
60” centered winters just
housing has PPM bearing bird gages on it. $300
Roxbury lightened
powerglide cut for aftermarket bell housing setup for direct drive (0
shows) $400
6:20 full spool 31 spline
$250, 5:83 full spool 31 spline $250, 2-C&S
carbs $125 each
2-Pinto spindles $50
each, 2-QA1 shocks $65 each, 4-Bilstein Shocks $30
each
scheonfeld crossover
headers w/Y $100, And anything else I can find laying around
1- front springs
(#650) with 2 nights on them $25, 1- rear spring
(#175) 1 heat race $25
Make reasonible offer on
total package. Willing to deal.
Call or text 605-680-4172
Quentin Myers
